Sportage 4WD L4-2.0L (2005)
Rear Defogger Relay: Testing and Inspection
REAR WINDOW DEFOGGER RELAY
INSPECTION
1. Remove the negative (-) battery terminal.
2. Remove the junction box.
3. Check for continuity between the terminals.
4. There should be continuity between the No.1 in the I/P-J terminal and No.7 in the I/P-F terminal when power and ground are connected to the
No.14 in the I/P-D terminal and No.7 in the I/P-C terminal.
5. There should be no continuity between the No.1 in the I/P-J terminal and No.7 in the I/P-F terminal when power is disconnected.
