Sportage 4WD L4-2.0L (2005)
4. Disconnect the rear wiper motor connector then remove the rear wiper motor (B) after removing 3 nuts.
Tightening torque Nut :
14 - 17 Nm (1.4 - 1.7 kgf.m, 10.1 - 12.3 lbf.ft)
5. Installation is the reverse of removal.
Installation
INSTALLATION
1. Install the rear wiper arm and blade to the specified position.
2. Set the rear washer nozzle on the specified spray position.
