Sportage 4WD L4-2.0L DOHC (1996)
Crankshaft Gear/Sprocket: Service and Repair
TIMING BELT PULLEY REMOVAL
1. Remove Timing Belt.
2. Remove the timing belt pulley lock bolt.
3. Remove the timing belt pulley.
INSTALLATION
1. Install the timing belt pulley with the mating marks aligned.
2. Position the guide plate as shown.
3. Install the lock bolt and tighten.
Tightening torque: 120 ft.lbs. (162 Nm)
4. Install timing belt as described in this section.
