Sportage 4WD L4-2.0L DOHC (1996)
15. Install the generator drive belt and adjust belt deflection by tightening adjusting bolt (C).
Generator Belt deflection:
New: 0.24-0.31 in. (6-8 mm)
Used: 0.27-0.35 in. (7-9 mm)
16. Tighten generator mounting bolts (A and B).
Tightening torque:
A: 16 ft.lbs. (22 Nm)
B: 32 ft.lbs. (45 Nm)
17. Install A/C drive belt and set belt deflection by tightening adjusting bolt (B).
A/C Belt deflection:
New: 0.27-0.35 in. (7-9 mm)
Used: 0.31-0.39 in. (8-10 mm)
18. Tighten the adjusting bolt (B) and idler pulley bolt (A)
Tightening torque: 23-25 ft.lbs. (31-34 Nm)
19. Install the splash guard and tighten the four mounting bolts.
20. Install the fan and fan shroud.