Sportage 4WD L4-2.0L DOHC (1996)
Installation
WARNING: FUEL IS EXPLOSIVE. WHEN WORKING ON FUEL SYSTEM PARTS, MAKE SURE TO SUPPLY ADEQUATE
VENTILATION TO THE WORK PLACE. DO NOT SMOKE, AND KEEP SPARKS AND OPEN FLAMES AWAY.
1. Connect the separator hoses to the fuel tank assembly.
2. Install the hose retaining clamps on the hoses from the separator assembly as they connect to the fuel tank.
3. Attach the bolt which holds the separator assembly to the inlet pipe assembly.
4. Install a nut to the attaching bracket for the neck portion of the inlet pipe assembly.
5. Install three screws to the neck portion of the inlet pipe assembly.
6. Install the filler cap to the threaded portion of the inlet pipe assembly.
7. Close the fuel inlet filler door by pushing it until the catch is secure.
