Sportage 4WD 2Dr L4-2.0L (2002)
Brake Master Cylinder: Service and Repair
Disassembly and Assembly
Disassembly
Notice:
-
Secure the master cylinder flange in a vise when necessary.
-
Replace the piston assembly, if necessary.
-
Do not let foreign material enter the cylinder, and do not scratch the inside of the cylinder or the outer surface of the piston.
1. Unscrew the screw and remove the reservoir.
2. Remove the cap and strainer from the reservoir.
3. Remove the two bushings.
4. Push the piston in with a screwdriver and then remove the stopper bolt.
Notice: Cover the end of the screwdriver with tape to prevent any damage to the piston or cylinder bore.
Notice: Remove the piston horizontally so as not to damage the cylinder bore.
5. Push the piston in with a screwdriver and remove the snap ring with a snap ring plier.
6. Remove the 1st piston assembly by hand.