Component Inspection - Sportage 4WD Drive Belt Testing and Inspection
Drive Belt: Testing and Inspection
Alternator Drive Belt
Generator Drive Belt
1. To remove the generator drive belt, remove the air conditioning drive belt first.
2. If adjustment or removal is necessary, loosen the mounting bolts (A and B) from the back side of the generator and adjust the deflection by turning
the adjusting bolt (C).
3. After making the adjustment, tighten the mounting bolts (A and B) to specification.
Tightening torque:
A: 16 ft. lbs. (22 Nm)
B: 32 ft. lbs. (45 Nm)
