Sportage 4WD 2Dr L4-2.0L (2002)
Hazard Warning Lamps: Service and Repair
Rear Combination Light Assembly
Rear Combination Light Assembly (2 Door)
Removal
CAUTION: When a removing or installing any electrical units, wiring or electrical connectors, disconnect the negative battery cable to prevent
possible short circuits which could lead to personal injury and/or property damage.
1. Disconnect negative battery cable.
2. Slide fronts seats forward(if not removed)
3. Pull lock knobs and fold rear seat down, then rotate rear seat forward.
4. Remove two screws that attach rear seat lock striker cover to side seat back.
5. Remove one bolt and three bolts that attach rear seat lock striker to side seat back.
