Sportage 4WD 2Dr L4-2.0L (2002)
Intake Air Duct: Service and Repair
Air Intake Duct
Removal
1. Loosen the clamps at the mass air flow sensor and the air cleaner housing ends of the air intake duct.
2. Remove the two mounting bolts for the air intake duct.
3. Remove the clamps and air intake duct.
Installation
1. Position the clamps on each end of the air intake duct.
2. Place the air intake duct between the air cleaner housing and the mass air flow sensor.
3. Slide the air intake duct over the lip on the mass air flow sensor and tighten the clamp.
4. Slide the air intake duct over the lip on the air cleaner housing and tighten the clamp.
5. Replace the two air intake duct retaining bolts.