Sportage 4WD 2Dr L4-2.0L (2002)
Drive/Propeller Shaft: Service and Repair
Universal Joint
UNIVERSAL JOINT
Disassembly
Notice: To prevent drive damage, use vise pads.
1. Place driveshaft in vise.
2. For re-assembly purposes, place index marks (reference marks) on the driveshaft, spider and yoke.
3. Using a screwdriver or drift punch, remove and discard all snap rings.
4. Lightly tap with a suitable hammer to remove bearings from the yoke.
5. Remove the yoke.
6. Using a drift punch and hammer, remove the spider bearings.
Assembly