Sportage 4WD 4Dr L4-2.0L (2000)
16. Raise the front axle housing back into place.
17. Install the front axle housing mounting bolts and tighten.
Tighten the mounting bolts to 48 ft. lbs. (65 Nm)
18. Lower the vehicle.
19. Add the specified amount of engine oil.
20. Connect the negative battery cable.
21. Install two top bolts on the engine intake manifold bracket.
Tighten the mounting bolts to 34 ft. lbs. (46 Nm)
22. Start the engine and check for any oil leakage.
