Sportage 4WD 4Dr L4-2.0L (2000)
5. Connect the temperature control cable to the heater.
6. Install the blower/evaporator unit.
7. Install the cover plate in place.
8. Insert four nuts to retain the cover plate in place.
Tighten the four nuts to 80 lb-in (9 N.m).
9. Reconnect the five connectors
10. Reinstall carpet
11. Replace the dash panel.
12. Connect the pressure hose to the evaporator core tube connection.
13. Connect the suction hose to the evaporator core tube connection.
14. Connect the heater return hose to the heater core outlet tube connection.
15. Connect the heater inlet hose to the heater core inlet tube connection.
16. Install the battery.
17. Install the battery bracket.
18. Connect the battery cables.
19. Replace the engine coolant.
