Sportage EX 4WD L4-2.0L (2000)
4. Push the piston in with a screwdriver and then remove the stopper bolt.
NOTICE:
-
Cover the end of the screwdriver with tape to prevent any damage to the piston or cylinder bore.
-
Remove the piston horizontally so as not to damage the cylinder bore.
5. Push the piston in with a screwdriver and remove the snap ring with a snap ring plier.
6. Remove the 1st piston assembly by hand.
7. Put a cloth around a wood block and then remove the 2nd piston assembly by tapping the cylinder flange lightly with the block.
INSPECTION