Sportage EX 4WD L4-2.0L (2000)
WARRANTY CLAIM INFORMATION
Repair Procedure
1.
Raise vehicle on hoist.
2.
Remove front wheel/tire assembly.
3.
Remove two bolts attaching brake caliper/anchor to knuckle and remove caliper/anchor assembly from rotor. Secure caliper/anchor assembly out
of the way with wire or tie wraps.
* NOTICE
Do not allow caliper/anchor assembly to hang from brake hose.
4.
Remove two screws securing brake rotor to wheel hub and remove rotor.
5.
Disconnect vacuum hose from fitting on knuckle.
6.
Remove ABS sensor attaching bolt and sensor from knuckle (if ABS equipped).
