REARSCREEN - Elimination of water penetration

Make

Lancia

Model

Thesis Factory Service Manual

Year

2002–2009

Section

Body window glasses › REARSCREEN - Elimination of water penetration

Body fittingsREARSCREEN - Elimination of water penetration

REARSCREEN - Elimination of water penetration

Operation 7035B04 · REARSCREEN

1. Wet the outer part of the rearscreen using soapy water.

2. Blow through from the inside using an air jet and identify the penetration point.

- If the penetration point is small, detach the interfering comonents and seal the area involved from the inside using a suitable sealant.

- Wait for it to dry and repeat the test.

- If the penetration point is larger.

See in Op. 7035B26 REARSCREEN GLASS - Clean edges and sand small abrasions

17 Body & interior