REAR BRAKE DISCS - R.R. with brake calipers removed

Operation 3310B52 · REAR DISC BRAKES

Removing

1. Remove the rear brake pads.

2. Undo the fixing bolts (2a) and remove the brake caliper bracket (2b).

1. Undo the fixing pin (1a) and remove the brake disc (1b).

Refitting

- Fit the brake disc in the housing on the hub.

- Tighten the pin fixing the brake disc to torque.

Each time the brake pads are removed the fastening springs on the bracket have to be replaced.

- Fit the bracket complete with brake pads and tighten the bolts fixing it to the wheel hub.