Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)22 · Fault diagnosis
22 · Diagnostics

Handbrake not working properly

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Handbrake › Handbrake not working properly
Fault diagnosisHandbrake not working properly

HANDBRAKE NOT WORKING PROPERLY

When the handbrake is operated the rear wheels are not locked.

STEPOPERATIONS TO BE CARRIED OUTTEST RESULTS
1CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION

Connect the Examiner diagnostic equipment to the diagnostic connector check the following at the Parking Brake Node (N.P.B.):in error environment

  • that there are no faults;

in parameters ambient

  • the plausibility of all the parameters
Move on to Step1. No dialogue with the NPB control unit

Restore the connection between the NPB control unit and the diagnostic socket

(Wiring Diagram ) E7020 ABS

Presence of errors in the NPB control unit2. Continue following the instructions in the diagnostic table
2CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION
With the Examiner diagnostic equipment connected to the diagnostic socket, carry out the active diagnosis of the rear brake caliper actuatorsMove on to StepActuators not activatedMove on to Step
3ELECTRICAL SYSTEM CHECK.ALL OKPROBLEMS ENCOUNTEREDACTION

Check the continuity/insulation of the electrical connections between the Parking Brake Node (N.P.B.) and the rear caliper actuators

(Wiring Diagram ) E7025 ELECTRIC HANDBRAKE

Move on to Step1. Electrical connections faulty

1. Restore the connections

(Wiring Diagram ) E7025 ELECTRIC HANDBRAKE

2. Electrical connections correct: actuators faulty2. Replace the rear brake caliper actuatotrs [PR.3380A66]
4CHECK ON CORRECT OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION

Check the correct static and dynamic operation of the parking brake

The test is essential becaues the braking system is one of the vehicle's safety systems

Fault persistsReplace the parking brake control unit [PR.3380A64]

Parts & tools for this job For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.