Front passenger seat height adjustment (front/rear rocker) not working
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Seats › Front passenger seat height adjustment (front/rear rocker) not working
‹ Prev Driver's seat height adjustment (front/rear rocker) not workingNext › Driver's seat heating is not working
Fault diagnosisFront passenger seat height adjustment (front/rear rocker) not working
FRONT PASSENGER SEAT HEIGHT ADJUSTMENT (FRONT/REAR ROCKER) NOT WORKING
the height adjustment is controlled by a joystick on the seat.
The possible adjustments are: completely raising or lowering the seat or tilting backwards or forwards.
| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS | ||
|---|---|---|---|---|
| 1 | COMPONENT CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Remove the control panel and check that it is working properly | Move on to Step | Control panel defective | Replace the control panel | |
| 2 | ELECTRICAL SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Remove the seat and check the wiring between the control panel and the rocker/lifting motors. (Wiring Diagram ) E3076 ELECTRICALLY-ADJUSTABLE SEATS | Move on to Step | Electrical equipment faulty. | Restore the electrical connection. (Wiring Diagram ) E3076 ELECTRICALLY-ADJUSTABLE SEATS | |
| 3 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | Fault persists | Replace the rocker motors. | ||
‹ Prev Driver's seat height adjustment (front/rear rocker) not workingNext › Driver's seat heating is not working
Parts & tools for this job For 2002 Lancia Thesis
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Lancia Thesis
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.