Tiiming system – tappets and rocker shafts
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Engine › Tiiming system – tappets and rocker shafts
‹ Prev Engine and power unit – engine assembly inspection and repairsNext › Cylinder head(s) – cylinder head/s - various operations
Manufacturing data and tolerancesTiiming system – tappets and rocker shafts
TIIMING SYSTEM – TAPPETS AND ROCKER SHAFTS
| Subject | Value | Validity |
|---|---|---|
| Inlet valves clearance in closed position | mm | 2.4 JTD 10V |
| Inlet valves clearance in closed position | 0.25 - 0.35 | |
| Exhaust valves clearance in closed position | mm | 2.4 JTD 10V |
| Exhaust valves clearance in closed position | 0.30 - 0.40 |
‹ Prev Engine and power unit – engine assembly inspection and repairsNext › Cylinder head(s) – cylinder head/s - various operations
Parts & tools for this job For 2002 Lancia Thesis
- PARTEngine gasket setSearch: Lancia Thesis 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.