Steering control and linkage – steering control
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Steering › Steering control and linkage – steering control
‹ Prev Anti-lock braking system (a.b.s.) – ABS system pipesNext › Steering control and linkage – STEERING CONTROL LINKAGE
Tightening torquesSteering control and linkage – steering control
Steering control and linkage – steering control
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 16 | Bolts | FLYWHEEL (MECH.) | M12 | T.T |
| (on flexible mounting) 5 | Bolt | POWER UNIT GEAR BOX END RIGID MOUNT | M10 X 1.25 | T.T |
| 5.0 | Nut | STEERING WHEEL | M16x1,5 | T.T |
| 2.8 | Bolt | STEERING SHAFT MOUNTING | M8 | T.T |
| 2 | Bolt | STEERING SHAFT MOUNTING | M8 | T.T |
| 2.8 | Bolt | STEERING SHAFT MOUNTING | M8 | T.T |
| 2 | Bolt | STEERING SHAFT MOUNTING | M8 | T.T |
| 2 | Bolt | STEERING SHAFT MOUNTING | M8 | T.T |
‹ Prev Anti-lock braking system (a.b.s.) – ABS system pipesNext › Steering control and linkage – STEERING CONTROL LINKAGE
Parts & tools for this job For 2002 Lancia Thesis
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Lancia power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.