Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Lancia Ypsilon Factory Service Manual (2003-2011)11 · Axles and driveshafts
11 · General

Intermediate drive shaft - r r

Make
Lancia
Model
Ypsilon Factory Service Manual
Year
2003–2011
Section
Front axle › Intermediate drive shaft - r r
Axles and driveshaftsIntermediate drive shaft - r r

Intermediate drive shaft - r r

Operation 2710A31 · Drive shafts and joints

1.3 JTD

Removing

Position the vehicle on the ramp.

Proceed with removal - 4450B04 right front wheel r r.

Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R..

Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R..

1. Undo the bolts fixing the right front hub steering knuckle to the front shock absorber.

2. Undo the bolts (2a) and remove the drive shaft (2b) from the intermediate drive shaft.

Intermediate drive shaft - r r

1. Undo the plug and drain the gearbox-differential oil.

Collect the gearbox-differential oil in a suitable container.

Intermediate drive shaft - r r

1. Undo the bolts (1a) and remove the intermediate drive shaft (1b).

2. Remove the dust excluder.

Intermediate drive shaft - r r

Refitting

1. Place back in its housing the intermediate drive shaft (1a) complete with dust cover (1b) and secure it with its bolts (1c) to the specified torque.

FasteningComponentØ

Value

(daNm)

1c
Intermediate drive shaft - r r

1. Tighten the gearbox-differential drain plug to the specified torque.

FasteningComponentØ

Value

(daNm)

1Drain plugGEAR CASING PADSM22(Differential side) 4.6
Intermediate drive shaft - r r

1. Connect the driveshaft to the intermediate driveshaft and fix it tightening the bolts to the recommended torque.

FasteningComponentØ

Value

(daNm)

1BoltDRIVESHAFTM8

2. Tighten the bolts fixing the right front hub steering knuckle to the front shock absorber to the recommended torque.

FasteningComponentØ

Value

(daNm)

2BoltFRONT HUB STEERING KNUCKLE.M10(Shock absorber side) 7.1 ÷ 7.9
Intermediate drive shaft - r r

Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R..

Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R..

Proceed with refitting - 4450B04 right front wheel r r.

Refill the manual gearbox and differential - 0010T40 change manual gearbox oil.

Remove the car from the ramps.

Parts & tools for this job For 2003 Lancia Ypsilon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.