Tailgate lock striker - r+r
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Tailgate/ › Tailgate lock striker - r+r
‹ Prev Single tailgate lock - r+r or repair with panel/protection removedNext › Exterior handle or block support - r+r with panel/protection removed
Body fittingsTailgate lock striker - r+r
Tailgate lock striker - r+r
Removing
- 7040B22 luggage compartment/load platform moulding - r+r
1. Undo the bolts.
2. Remove the striker.
Refitting
Check that the striker is undamaged.
Position the striker and screw in the bolts without tightening them.
- 7040B22 luggage compartment/load platform moulding - r+r
1. Remove the covers.
2. Working on the bolts through the openings (2a), adjust the position of the striker (2b). Tighten the bolts (2c). The arrows show the possible movements.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 2c | Bolt | TAIL-GATE LOCK STRIKER | M6 | 0.9 |
Check that the tailgate opens and closes properly.
‹ Prev Single tailgate lock - r+r or repair with panel/protection removedNext › Exterior handle or block support - r+r with panel/protection removed
Parts & tools for this job For 2003 Lancia Ypsilon
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Lancia touch up paint
- PARTPanel clip assortmentSearch: Lancia panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.