Cold air intake - r r

Operation 1048A23 · Vacuum air circuit

1.2 8v

Removing

1. Undo the retaining clips and release the cold air intake for air filter from the air filter.

2. Remove the air filter cold air intake by withdrawing from the body passages.

1.2 16v

Removing

1. Undo the retaining clips and release the cold air intake for air filter from the air filter.

2. Remove the air filter cold air intake by withdrawing from the body passages.

1.4 16v

Removing

1. Undo the retaining clips and release the cold air intake for air filter from the air filter.

2. Remove the air filter cold air intake by withdrawing from the body passages.

1.3 JTD

Removing

1. Disconnect the air filter cold air intake, air filter side and remove it by releasing it from the front fastening.

1.2 8v

Refitting

Place the cold air intake for the air filter back in its housing by positioning within the passage on the body.

Connect the cold air intakefor the air filter to the air filter.

1.2 16v

Refitting

Place the cold air intake for the air filter back in its housing by positioning within the passage on the body.

Connect the cold air intake for air filter to the air filter.

1.4 16v

Refitting

Place the cold air intake for the air filter back in its housing by positioning within the passage on the body.

Connect the cold air intake for air filter to the air filter.

1.3 JTD

Refitting

Place the air filter cold air intake in its housing and connect it.