Passenger side temperature adjustment does not work
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Climate control › Passenger side temperature adjustment does not work
‹ Prev Climate control recirculation automatic mode not workingNext › Windscreen misting with the formation of condensation
Fault diagnosisPassenger side temperature adjustment does not work
PASSENGER SIDE TEMPERATURE ADJUSTMENT DOES NOT WORK
When the required temperature is set on the passenger side, no air flow is felt at the required temperature
| Results of the tests | ||||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect the Examiner, check for errors on the passenger side air mixing motor | Continue to Step 2 | Mixed air motor error. | Continue to Step 3 | |
| 2 | CHECKING USING TESTER | All OK | Problems met | Operation |
| Keep the Examiner connected and check the operation of the mixed air operation by means of active diagnosis. | Continue to Step 7 | Air mixing motor does not work | Continue to Step 3 | |
| 3 | ELECTRICAL CIRCUIT CHECK | All OK | Problems met | Operation |
| Check continuity/insulation of the electrical connection between climate control Node and passenger side air mixing motor See E6020 AIR CONDITIONING | Continue to Step 4 | Electrical conection broken or not insulated. | Restore electrical connection continuity/insulation. See E6020 AIR CONDITIONING | |
| 4 | CHECKING AIR MIXING MOTOR OPERATION | All OK | Problems met | Operation |
| Check the presence of the control signal coming from the climate control node See E6020 AIR CONDITIONING | Continue to Step 5 | No signal | Continue to Step 7 | |
| 5 | AIR MIXING MOTOR FLAP CHECK | All OK | Problems met | Operation |
| Check that the air mixing motor flap moves through its travel without sticking. | Continue to Step 6 | Flap blocked or damaged | Release the air recirculation motor flap from its block or replace the flap if damaged. | |
| 6 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present. | End of diagnosis | Fault persists | Change the passenger side air mixing motor Op. 5040D86 | |
| 7 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Change the climate control system node Op. 5040D18 | |
‹ Prev Climate control recirculation automatic mode not workingNext › Windscreen misting with the formation of condensation
Parts & tools for this job For 2003 Lancia Ypsilon
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Lancia Ypsilon 2003 cabin filter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.