Electric front windows / not working
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Window opening mechanism › Electric front windows / not working
‹ Prev Windscreen misting with the formation of condensationNext › Electric front windows / not working in automatic mode
Fault diagnosisElectric front windows / not working
ELECTRIC FRONT WINDOWS / NOT WORKING
When the relevant switches are pressed, the front driver and passenger side windows do not work.
The power supply to the door nodes, that control the window electric motors, is protected by special fuses that are housed in the underfacia junction unit and governed by a relay, also located in the underfacia junction unit
| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check the condition of the door Node supply system fuse. See E3050 ELECTRIC FRONT WINDOWS | Continue to Step 1 | Fuses damaged | Replace fuse | |
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect the diagnostic equipment and check operation of the door Node supply control relay See E3050 ELECTRIC FRONT WINDOWS | Continue to Step 2 | Relay damaged | Replace relay | |
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Replace the body computer node Op. 5505A32 Search for the fault starting from another symptom' | ||
‹ Prev Windscreen misting with the formation of condensationNext › Electric front windows / not working in automatic mode
Parts & tools for this job For 2003 Lancia Ypsilon
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Lancia touch up paint
- PARTPanel clip assortmentSearch: Lancia panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.