Workshop Manuals Factory service & repair Land Rover
01 Introduction02 Fuse details03 Earth points and header joints04 Description and operation05 Connectors
Land Rover Defender 300Tdi Electrical Library04 · Description and operation
04 · General

Left Turn

Make
Land Rover
Model
Defender 300Tdi Electrical Library
Section
Indicators / hazard warning lamps › Left Turn
Description and operationLeft Turn

Left Turn

Moving the column switch to the left turn position allows power to flow through the switch (C036-4) to the LH rear direction indicator lamp (C403-2), the LH front direction indicator lamp (C001-2), and the LH side repeater lamp (C013-1). These 3 lamps are connected in parallel and are all fed by green/red wires. Power is also supplied to the instrument pack warning lamp (C230-10) on a green/red wire. All lamps are earthed on black wires. With the circuit complete, the flasher unit commences opening and closing the circuit, causing the LH indicator lamps to flash.

Right Turn

Moving the column switch to the right turn position allows power to flow through the switch (C036-2) to the RH rear direction indicator lamp (C402-2), the RH front direction indicator lamp (C002-2), and the RH side repeater lamp (C012-1). These 3 lamps are connected in parallel and are all fed by green/white wires. Power is also supplied to the instrument pack warning lamp (C230-9) on a green/white wire. All lamps are earthed on black wires. With the circuit complete, the flasher unit commences opening and closing the circuit, causing the RH indicator lamps to flash.

Parts & tools for this job For Land Rover Defender

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.