Workshop Manuals Factory service & repair Land Rover
Land Rover Defender V8i Workshop Manual Supplement15 · Front axle and final drive
15 · Steering & suspension

Differential pinion oil seal (page 2 of 2)

Make
Land Rover
Model
Defender V8i Workshop Manual Supplement
Section
Repair
Front axle and final driveDifferential pinion oil seal · page 2 of 2

Refit

  1. Clean pinion oil seal recess and pinion flange.
  2. Lubricate oil seal lip with clean oil.
  3. Using LRT-51-010 fit pinion oil seal.
  4. Fit pinion flange.
  5. Restrain flange using LRT-51-003 and fit bolt. Tighten bolt to 100 Nm (74 lbf.ft).
  6. Position propeller shaft to differential housing and align reference marks.
  7. Fit flange bolts and tighten to 48 Nm (35 lbf.ft).
  8. Remove stands and lower vehicle.
  9. Top-up differential oil level.

Parts & tools for this job For Land Rover Defender

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.