300Tdi Defender Rear Side Door Glass - Replacement Guide
CHASSIS AND BODY
7
REPAIR
DOOR GLASS - REAR SIDE DOOR
Service repair no - 76.31.02
Remove
1. Disconnect door check rod from door post.
2. Remove door trim casing
See Door trim casing
.
3. Remove plastic sheet.
4. Remove window regulator assembly
See
Window regulator - rear side door .
5. Disconnect and remove door sill locking button
See Sill locking button .
6. Disconnect control rods from latch and door
outer handle mechanism.
7. Remove 4 screws retaining mounting panel to
door and remove panel, complete with rods and
control lever.
8. Remove single self tapping screw to remove
water channel.
9. Remove 2 screws and remove door check
torsion bar.
10. Remove door check rod by bending back end
stop to enable rod to be withdrawn.