Mounting Panel - Front Door for 300Tdi Defender
CHASSIS AND BODY
9
REPAIR
MOUNTING PANEL - FRONT DOOR
Service repair no - 76.11.28
Remove
1. Remove door trim casing
See Door trim
casing and plastic sheet.
2. Remove 4 screws securing window regulator to
mounting panel.
3. Remove 5 screws securing mounting panel to
door frame.
4. Release remote control lever rod from latch
mechanism and from plastic clip in mounting
panel.
5. Slide window regulator arm from mounting panel
channel and remove panel with remote control
lever and rod.
Refit
6. Engage window regulator arm in mounting panel
channel.
7. Connect remote control rod to latch mechanism
and secure with clip.
8. Fit mounting panel and retain with 5 screws.
9. Secure window regulator to mounting panel with
4 screws.
10. Raise and lower window to check for free
movement.
11. Fit plastic sheet, and door trim casing
See
Door trim casing .