300Tdi Defender
76
CHASSIS AND BODY
20
REPAIR
REAR SEAT BELTS - 90/110 STATION WAGON,
INWARD FACING SEATS
Service repair no - 76.73.18
Remove
1. Release belt straps from buckles.
2. Release stowage straps and lower both seat
cushions.
3. Unscrew bolt securing lap strap to body
mounting.
4. Remove lap strap, wavy washer, spacer and
plain washer.
5. Repeat operation for buckle strap.
Refit
6. Secure lap strap and buckle straps to body.
Tighten bolts to
32 Nm (24 lbf/ft).
7. If required, secure seat cushions and belts in
stowed position.
REAR SEAT BELTS - 110
Service repair no - 76.73.18
Remove
1. Remove rear inward facing seats
See Rear
seat squab - 90 or See Rear bench seat .
2. Remove side trim panel
See Side trim panel .
3. Remove bolt securing seat belt inertia reel to ’C’
post.
4. Remove seat belt assembly.
5. Pull seat belt straps between seat cushion and
squab into rear of vehicle.
6. Remove finisher cap and bolt securing seat belt
anchorage to floor.
7. Remove seat belt assembly.