Defender 90 (LD) V8-4.0L (1997)
15. Route cable to rear of instrument panel cowl, along bulkhead and out through grommet into engine compartment.
16. Fit lever assembly to instrument panel cowl. Ensure screw spacers are fitted between cowl and lever assembly.
17. Fit instrument binnacle to fascia cowl.
18. With lever in closed position, fit control cable to heater unit flap lever trunnion.
19. Secure outer cable with retaining clip.
20. Secure control cables to engine bulkhead and heater hoses with retaining clips.
21. Reconnect battery.