Defender 90 (LD) V8-4.0L (1997)
/v8-4.0l/Page-6001.png)
Compressor Clutch Relay: Service and Repair
Remove
1. Disconnect multiplug from relay.
NOTE: Connector wiring: G, B/W, N/R, N/W
2. Release securing screw and remove relay from side of evaporator casing.
Refit
3. Fit screw and securing relay to side of casing.
4. Connect multiplug to relay.
5. Carry out system test. Refer to: Testing and Inspection.
