Discovery II
AUTOMATIC GEARBOX - ZF4HP22 - 24
44-36
REPAIRS
21. Models fitted with high/low shift interlock
solenoid: Position interlock solenoid harness
to high/low shift cable, fit sleeve around cable
and harness, secure sleeve.
22. Models fitted with high/low shift interlock
solenoid: Connect solenoid multiplug to main
harness and secure multiplug to bracket.
23. Position hand brake back plate and tighten
bolts to 75 Nm (55 lbf.ft).
24. Fit hand brake drum and tighten screw.
25. Remove bolts securing tool LRT-99-008A to
gearbox.
26. Rotate engine to align torque converter, fit new
bolts and tighten to 50 Nm (37 lbf.ft).
27. Fit access plug to torque converter housing.
28. Fit rear propeller shaft.
29. Fit front propeller shaft.
30. Fill transfer gearbox with oil.
31. Fill automatic gearbox with oil.
32. Position intermediate silencer and secure to
mounting rubbers.
33. Clean silencer and tail pipe mating faces.
34. Position new gasket to tail pipe and tighten nuts
to 40 Nm (30 lbf.ft).
35. Fit exhaust front pipe.
SYSTEMS - V8, REPAIRS, Front pipe.
36. Position centre cross member, fit bolts and
tighten to 26 Nm (19 lbf.ft).
37. Connect battery earth lead.
38. Fit battery cover and secure fixings.
39. Check and adjust selector cable.
