Discovery II
AUTOMATIC GEARBOX - ZF4HP22 - 24
REPAIRS
44-23
REPAIRS
Cable and lever assembly - selector
$% 44.15.08
Remove
1. Remove centre console.
REPAIRS, Console - centre - automatic
models.
2. Raise vehicle on ramp.
3. Loosen selector cable trunnion nut.
4. Remove 'C' clip and release selector cable
from gearbox bracket.
5. Lower vehicle on ramp.
6. Remove sound deadener pad.
7. Remove 3 bolts securing selector lever bracket
to tunnel, remove selector lever.
8. Remove 'C' clip securing outer cable to
selector lever bracket.
9. Remove locking ring securing inner cable to
selector lever.
10. Release inner cable from selector lever,
release cable from grommet and remove cable
from selector lever bracket.
Refit
1. Position cable through grommet, align to
bracket and secure with 'C' clip.
2. Fit inner cable to selector lever and secure with
locking ring.
3. Feed selector cable through tunnel, align
bracket, fit and tighten bolts.
4. Fit sound deadener pad.
5. Fit centre console.
REPAIRS, Console - centre - automatic
models.
6. Position selector cable through trunnion and
gearbox bracket, secure with 'C' clip.
7. Adjust selector cable.
