Discovery II
CHARGING AND STARTING
REPAIRS
86-1-1
CHARGING AND STARTING
REPAIRS
Alternator - diesel
$% 86.10.02
Remove
1. Remove auxiliary drive belt.
REPAIRS, Belt - auxiliary drive.
2. Release cover and remove nut securing lead
to alternator.
3. Disconnect alternator multiplug.
4. Remove bolt (LH thread) and remove auxiliary
drive belt tensioner.
5. Remove bolt securing support stay to
alternator.
6. Release clip and disconnect oil drain hose from
vacuum pump.
7. Disconnect vacuum pump oil supply pipe from
cylinder head and discard 'O' ring.
8. Remove bolt securing alternator and release
from mounting bracket.
9. Disconnect vacuum hose from vacuum pump.
10. Remove alternator. Take care not to damage
radiator cooling fins.
11. Remove 4 bolts, and remove vacuum pump
from alternator.
CAUTION: Always fit plugs to open
connections to prevent contamination.