landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

PROPELLER SHAFTS > < Harness - solenoid valves
Page 655
background image

AUTOMATIC GEARBOX - ZF4HP22 - 24

44-58

REPAIRS

Electronic control unit - automatic 
transmission

$% 44.15.46

Remove

1. Release fixings and remove battery cover.
2. Disconnect battery earth lead.

3. Remove 3 screws and trim clip securing lower 

trim casing to LH front seat.

4. Remove 3 nuts securing speaker power 

amplifier bracket to the body.

5. Disconnect multiplug from automatic 

transmission ECU located on underside of 
amplifier mounting bracket.

6. Remove 2 nuts securing ECU to mounting 

bracket and remove ECU.

Refit

1. Position ECU to mounting bracket and secure 

with nuts.

2. Connect multiplug to ECU.
3. Position speaker power amplifier mounting 

bracket to body and secure with nuts.

4. Position lower trim casing to seat and secure 

with screws and trim clip.

5. Connect battery earth lead.
6. Fit battery cover and secure fixings.

PROPELLER SHAFTS > < Harness - solenoid valves