Discovery II
AUTOMATIC GEARBOX - ZF4HP22 - 24
44-26
REPAIRS
Seal - selector shaft
$% 44.15.34
Remove
1. Remove valve body assembly.
- 24, REPAIRS, Valve body assembly.
2. Remove nut securing selector shaft lever and
release lever from shaft.
3. Remove 2 bolts securing gear selector switch
to gearbox and remove switch.
4. Drift out and discard selector quadrant roll pin.
Remove selector shaft.
5. Remove selector quadrant and connecting rod.
6. Remove oil seal taking care not to damage
seal housing.
Refit
1. Clean shaft and seal housing.
2. Using a suitable adapter, fit new seal.
3. Position selector quadrant and connecting rod.
4. Position selector shaft and secure to quadrant
using new roll pin.
5. Fit valve body assembly.
