Discovery II
ENGINE - V8
12-2-26 REPAIRS
Engine assembly
$% 12.41.01.99
Remove
1. Drain engine oil and remove oil filter.
2. Remove radiator.
3. Remove upper inlet manifold.
SYSTEMS - V8, REPAIRS, Gasket - inlet
manifold - upper - Without Secondary Air
Injection.
4. Remove ignition coil assemblies.
5. Position absorbent material to catch spillage
and disconnect fuel pipe from fuel rail.
CAUTION: Always fit plugs to open
connections to prevent contamination.
6. Release 2 hose clips and remove top hose.
7. Using a 15 mm spanner, release auxiliary drive
belt tension and remove drive belt.
8. Remove 3 bolts securing ACE pump, release
pump and tie aside.
9. Disconnect multiplug from A/C compressor.
10. Remove 4 bolts securing A/C compressor,
release compressor and tie aside.