Discovery II
ENGINE - V8
12-2-36 REPAIRS
Pump - oil
$% 12.60.26
Remove
1. Remove timing gear cover gasket.
ENGINE - V8, REPAIRS, Gasket -
2. Remove bolt securing CMP sensor, remove
clamp and sensor.
3. Remove 6 bolts securing coolant pump,
remove pump and discard gasket.
4. Remove oil pressure switch and discard
sealing washer.
5. Remove 4 bolts securing oil filter head, remove
filter head and discard 2 'O' rings.
6. Remove filter head adaptor.
Refit
1. Ensure filter head adaptor is clean.
2. Fit filter head adaptor and tighten bolts to 13
Nm (9 lbf.ft).
3. Clean filter head and mating face.
4. Fit new 'O' rings to filter head and filter head
adaptor.
5. Fit filter head and tighten bolts to 8 Nm (6 lbf.ft).
6. Ensure oil pressure switch and mating face is
clean.
7. Fit new sealing washer and tighten switch to 15
Nm (11 lbf.ft).
8. Clean coolant pump and mating face.
9. Use a new gasket and fit coolant pump.
Tighten bolts securing coolant pump to 25 Nm
(19 lbf.ft).
10. Ensure CMP sensor is clean and fit sensor to
cover.
11. Fit clamp to CMP sensor and tighten bolt to 8
Nm (6 lbf.ft).
12. Fit timing gear cover gasket.