Discovery II
FRONT SUSPENSION
REPAIRS
60-55
Pipe assembly - pump or reservoir to
valve block - ACE - diesel
$% 60.60.32
CAUTION: The ACE hydraulic system is
extremely sensitive to the ingress of dirt or
debris. The smallest amount could render the
system unserviceable. It is imperative that the
following precautions are taken.
l
ACE components are thoroughly cleaned
externally before work commences;
l
all opened pipe and module ports are
capped immediately;
l
all fluid is stored in and administered
through clean containers.
Remove
1. To avoid any possibility of swarf ingress,
remove valve block.
2. Drain cooling system.
ADJUSTMENTS, Drain and refill.
3. Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
4. Remove RH front road wheel.
5. Remove 3 screws and remove splash shield.
6. Remove viscous fan.
COOLING SYSTEM - Td5, REPAIRS,
7. Remove 2 screws securing lower half of fan
cowl and remove cowl.
8. Disconnect multiplug from air flow meter.
9. Release clips and remove air flow meter from
air cleaner.
10. Collect 'O' ring.
