Discovery II
FRONT SUSPENSION
REPAIRS
60-57
20. Valve block to reservoir pipe: Release clip,
disconnect hose from ACE fluid reservoir and
remove clip from hose.
CAUTION: Always fit plugs to open
connections to prevent contamination.
21. Remove bolts securing 2 pipe clamps to
chassis front cross member and remove
clamps.
22. Valve block to reservoir pipe: Release fluid
return pipe from clip on LH chassis member.
23. Remove bolt securing pipe clamp to RH
chassis member and remove clamp.
24. Release harness clip from RH suspension
turret.
25. Remove nut securing pipe clamp to bracket on
RH suspension turret and remove clamp.
26. Release pipe from isolator above chassis RH
front outrigger.
27. Cut pipe at suitable point near suspension
turret.
28. Remove and discard front and rear sections of
pipe.
