Discovery II
INTERIOR TRIM COMPONENTS
REPAIRS
76-3-3
Trim casing - upper - 'B' post
$% 76.13.28
Remove
1. Release front door aperture seal from 'B' post.
2. Release rear door aperture seal from 'B' post.
3. Remove cap from front seat belt lower
anchorage bolt.
4. Remove front seat belt lower anchorage bolt.
5. Feed seat belt through trim casing.
6. Remove trim casing.
7. Remove sound insulation from trim casing.
Refit
1. Fit sound insulation to trim casing.
2. Feed front seat belt through trim casing.
3. Fit front seat belt lower anchorage and tighten
bolt to 32 Nm (24 lbf.ft).
4. Fit cap to front seat belt lower anchorage bolt.
5. Fit trim casing to 'B' post.
6. Fit front door aperture seal to 'B' post.
7. Fit rear door aperture seal to 'B' post.
Trim casing - lower - 'B' post
$% 76.13.29
Remove
1. Release front door aperture seal from 'B' post.
2. Release rear door aperture seal from 'B' post.
3. Move 'B' post upper trim casing aside.
4. Release 3 clips securing lower trim casing to
'B' post.
5. Remove lower trim casing.
Refit
1. Fit lower trim casing to 'B' post and secure with
clips.
2. Position 'B' post upper trim casing to 'B' post.
3. Fit front door aperture seal to 'B' post.
4. Fit rear door aperture seal to 'B' post.