Discovery II
SEATS
76-5-16 REPAIRS
8. Release pretensioner multiplug from seat
frame and disconnect.
9. Electrically operated seats: Disconnect 2
seat motor multiplugs.
10. Remove front seat.
Refit
1. Fit front seat in vehicle.
2. Electrically operated seats: Connect seat
motor multiplugs.
3. Connect pretensioner multiplug and secure to
seat frame.
4. Fit Torx bolts and nut securing front seat to floor
and tighten to 45 Nm (33 lbf.ft).
5. Fit front seat belt lower anchorage bolt to front
seat and tighten to 32 Nm (24 lbf.ft).
6. Fit cap to lower anchorage bolt.
7. Fit lower trim casing to seat and secure with
screws and trim clip.
8. Connect battery earth lead.
Seat - third row
$% 78.10.45
Remove
1. Manufacture a spring retainer bracket to the
dimensions given above.
2. Position third row seat in deployed position.
3. Remove the cup holder (where applicable).