Lamp assemblies - condensation
- Make
- Land Rover
- Model
- Discovery Technical Bulletins
- Section
- Lamp assemblies - condensation › Lamp assemblies - condensation
LAMP ASSEMBLIES - CONDENSATION
- Model
- New Range Rover Discovery Defender
- Affected vehicles
- All All All
- Date
- 1997-01-09
- Reference
- 09/01/97
Bulletin text
Lamp Assemblies - Condensation
MODEL
New Range Rover
Discovery Defender
DETAIL
It has been bought to our attention that lamp assemblies are being replaced due to condensation sitting behind the lamp lens, The condensation is caused by changes in atmospheric weather conditions and is considered normal.
Note: If untouched the condensation will evaporate naturally as atmospheric weather conditions change.
ACTION REQUIRED
Information only: Where a case of water condensation is encountered, the side light assembly be replaced. Explain to the customer that condensation cannot be prevented during all atmospheric conditions. However, if left untouched it will evaporate naturally.
PARTS INFORMATION
Not applicable
PROCEDURE
Not applicable
© Rover Group 1996
09/01/97
86/02/97/EN
AFFECTED VEHICLES
LP All LH LJ All LD All
Must Not
WARRANTY
Normal warranty policy and procedures apply, if a warranty claim is received for this issue it may be rejected.
COMP. CODE
Not applicable
SRO
Not applicable
Parts & tools for this job For Land Rover Discovery
- PARTReplacement bulbsSearch: Land Rover Discovery bulbs
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.