300Tdi Discovery Clutch: 300 Tdi Model Specification Data
04
GENERAL SPECIFICATION DATA
20
INFORMATION
Lubrication
System
Wet sump, pressure fed
.............................................................................
Pressure, engine warm at normal operating speeds
25 - 55lbf/in
2
= 1,76 - 3,87Kgf cm
2
........
Oil pump:
- Type
G-rotor integral with front cover.
......................................................................
- Drive
off crankshaft nose
.....................................................................
Oil pressure relief valve
Non-adjustable
....................................................
Relief valve spring:
- Full length
51,6mm
......................................................................
- Compressed length at 7.71Kg load
31mm
................................
Oil filter
Screw-on disposable canister
.............................................................................
Engine oil cooler
Combined with coolant radiator and intercooler
...............................................................
FUEL SYSTEM - 300 Tdi
Fuel lift pump type
Mechanical with hand primer
............................................................
Fuel lift pump pressure
42 - 55 kpa at 1800 rpm
.....................................................
Fuel filter
Paper element in disposable canister
..........................................................................
Air cleaner
Paper element type
........................................................................
COOLING SYSTEM - 300 Tdi
System type
Pressurised, spill return, thermostatically controlled
.....................................................................
water and anti freeze mixture. Pump assisted thermo
syphon. Coolant radiator combined with oil cooler and
turbo intercooler.
Cooling fan
11 blade axial flow 433 mm diameter. 1.29:1 drive
.......................................................................
ratio. Viscous coupling.
Pump type
Centrifugal, impellor, belt driven.
........................................................................
Thermostat opening
88
°
.........................................................
Expansion tank cap pressure
15lbf/in
2
= 1,06Kgf cm
2
(system pressure)
...........................................
CLUTCH - 300 Tdi
Type
Valeo diaphragm spring
.................................................................................
Centre plate diameter
235 mm
.......................................................
Facing material
Verto F202 grooved
.................................................................
Release bearing
Ball journal
...............................................................
