300Tdi Discovery
GENERAL SPECIFICATION DATA
9
INFORMATION
TRANSMISSION 3.9 V8i
Manual gearbox
Type R380
Single helical constant mesh
.......................................................................
Speeds
5 forward 1 reverse all synchromesh
.............................................................................
Clutch
Make and type
Borg and beck diaphram type.
.................................................................
Clutch plate diameter
266.5mm.
.......................................................
Automatic gearbox
Type ZF4HP
Four speed and reverse with fluid torque converter
.....................................................................
Transfer box
Type LT230T
Two speed reduction on main gearbox output, front
....................................................................
and rear drive permanently engaged via a lockable
differential.
Propeller shafts
Type
Front
Tubular 51mm diameter
.................................................................................
Front - Catalyst vehicles
Solid bar 28.6mm diameter
...................................................
Rear
Tubular 51mm diameter
.................................................................................
Universal joints
Open type Hookes O3EHD
.................................................................
Rear axle
Type
Spiral bevel, fully floating shafts
.................................................................................
Ratio
3.54:1
.................................................................................
Front axle
Type
Spiral bevel, enclosed constant velocity joints, fully
.................................................................................
floating shafts
Angularity of universal joint on full lock
32
°
............................
Ratio
3.54:1
.................................................................................