300Tdi Discovery
4.0 V8
9
REPAIR
28. Remove alignment tool LRT-12-090.
29. Apply a small amount of Loctite 242 to threads
and refit front cover bolts. Tighten to
22 Nm.
30. Fit sump bolts. Tighten to
23 Nm.
31. Connect camshaft sensor multiplug.
32. Connect Lucar to oil pressure switch terminal.
33. Remove plugs from oil cooler pipes and cover.
34. Fit new ’O’ ring seals, reconnect oil cooler pipes.
Tighten to
15 Nm.
CAUTION: Over tightening of oil cooler
pipe unions can crack front cover.
35. Refit bottom hose to water pump. Tighten clip.
36. Refit water pump pulley.
See COOLING
SYSTEM, Repair, Viscous Coupling, Fan
Blades, Pulley and Fan Cowl
37. Refit radiator assembly.
See COOLING
SYSTEM, Repair, Radiator
38. Refill cooling system.
See COOLING SYSTEM
V8, Adjustment, Coolant
39. Check/top-up engine oil.
40. Lower ramp.
41. Reconnect battery negative lead.
