300Tdi Discovery
12
ENGINE
20
REPAIR
Exhaust only
13. Fit bolts finger tight.
14. Working from the centre outwards, progressively
tighten bolts to the correct torque.
10Nm
Inlet and exhaust
15. Fit spark plug cover to camshaft cover, tighten
screws.
CAMSHAFT DRIVE BELT
Service repair no - 12.65.17
Remove
NOTE: If the timing belt is to be removed
from the camshaft gears only, it is not
necessary to remove the drive belt,
crankshaft pulley or timing belt lower cover.
1. Remove drive belt.
2. Remove 5 bolts securing timing belt top cover.
3. Remove top cover.
4. Remove 5 bolts securing timing belt centre
cover.
5. Remove timing belt centre cover.
6. Rotate crankshaft to align timing marks on
camshaft gears - 90
°
BTDC.
