Repairing Camshaft Front Oil Seal on 300Tdi Discovery's Mpi Engine - Page 247
12
ENGINE
2
REPAIR
13. Remove 2 bolts securing camshaft gears to
camshafts.
14. Remove tool LRT-12-060.
CAUTION: Do not rotate camshafts.
15. Remove gears noting the ’IN’ and ’EXHAUST’
identifying marks.
16. Remove 5 bolts securing timing belt upper
backplate.
17. Remove belt upper backplate.
18. Remove seals using tool LRT-12-063 fit
thrustpad as shown.
Refit
1. Clean sealing area of cylinder head and
camshaft, ensure all traces of rubber are
removed - do not scrape.
2. Using tool LRT-12-064 and LRT-12-072 fit new
camshaft oil seals.
CAUTION: Ensure sealing lip of seal is not
distorted.