300Tdi Discovery
Mpi
15
REPAIR
4. Release clip and disconnect hose from heater
rail.
5. Disconnect 2 coolant temperature sensor
multiplugs.
6. Release clips and disconnect the bypass hose
and top hose.
7. Release harness from cable tie.
8. Disconnect oxygen sensor multiplug.
9. Release harness lead from cable tie.
10. Release throttle cable from abutment bracket.
11. Release throttle cable from cam. Also remove
coolant bypass hose from throttle housing.
12. Disconnect stepper motor and throttle
potentiometer multiplugs.
13. Release clip and disconnect hose, air cleaner to
throttle housing.
